Solar Project

DSC_0003.JPG
The solar control panel - 20 amp isolator switches to allow for a bit of expansion. The charge controller is on the right.
DSC_0004.JPG
Fitting the wooden mountings to the bottom of the panel's frame. The electrical connection box is at the bottom.
DSC_0005.JPG
Preparing to test the panel.
DSC_0006.JPG
The panel installed on the shed roof.
DSC_0007.JPG
Another view of the installed panel.
DSC_0014.JPG
The almost finished control board: top, 240vac inverter and associated sockets. Below, the top ammeter measures load, the bottom ammeter measures solar input. Charge controller is at the bottom, and the circuit on the breadboard is the LED lighting controller.